Prices
How much does garage door installation cost in the UK?
Garage door installation labour in the UK typically makes up 25–40% of the total installed price, with day rates of £200–£350 per installer. A single up-and-over door installed from £995 inc. VAT means roughly £250–£400 of that is fitting labour, plus £200–£300 if the old door needs removing and disposing of.
This page separates the fitting cost from the door itself — useful if you are comparing a supply-only price against a fully fitted one, or querying what a quote actually covers.
What a survey checks before you get a firm price
A proper UK installer survey measures the actual opening (not just "a standard single garage"), checks headroom above the opening, confirms there is enough side room for track or gear, checks the lintel and brickwork are sound enough to fix into, and confirms van access to get the door and old-door waste in and out. Any of these being non-standard is what turns a reference-price quote into a higher bespoke one — it is worth asking an installer to state clearly which of these, if any, apply to your garage.
Supply-only vs supply-and-fit
Some UK suppliers sell doors supply-only, leaving you to arrange your own installer — this can be cheaper on the door itself but shifts risk to you if the fit goes wrong, and may affect the manufacturer's warranty if installed incorrectly. Supply-and-fit is the standard route reflected in every reference price on this site, and is the safer default unless you specifically have a trusted, experienced installer lined up.
What extends the job beyond a single day
A straightforward single-door replacement into an existing, sound opening normally completes within one day. Jobs that commonly run longer include: any lintel or brickwork repair found during the survey, double-door installations, sectional doors needing a low-headroom track kit fitted, and jobs where the old door and frame need significant demolition rather than a straightforward unbolt-and-lift-out removal.
Getting a comparable quote
Ask every installer you quote to state, in writing: whether VAT is included, whether removal and disposal of the old door is included or a separate £200–£300 line, how many days the job is expected to take, and what happens if the survey finds brickwork or lintel work is needed. Quotes that omit these are much harder to compare fairly against each other, even where the headline number looks similar.
| Item | Typical range | Notes |
|---|---|---|
| Fitting labour share of total price | 25–40% | Varies by door type and access |
| Installer day rate | £200–£350 | Per installer, per day |
| Removal and disposal of old door | £200–£300 | Old door, frame, redundant track |
| Manual-to-electric retrofit (labour + kit) | £400–£650 | Adding an operator to an existing suitable door |
Figures inc. VAT. London and the South East installer rates typically run 15–25% higher than the rest of the UK. A straightforward single-door fit usually completes in one day; sectional doors with structural track work, or double doors, can take longer.
Questions people ask
- How much of a garage door quote is labour vs the door itself?
- UK garage door fitting labour typically makes up 25–40% of the total installed price, with the door and hardware making up the rest. Installer day rates run £200–£350, and most single-door fits complete within one day where the opening needs no structural work.
- Is removing the old garage door included in the price?
- Not always — removal and disposal of an old garage door and frame is commonly a separate line item, typically £200–£300 inc. VAT, on top of the new door and fitting. Always confirm in writing whether a quote includes this before comparing prices between installers.
- How long does a UK garage door installation take?
- A straightforward single garage door replacement into a sound, standard opening typically completes within one working day in the UK. Jobs needing brickwork or lintel repair, a low-headroom track kit, or a double-door installation can take longer — a survey should flag this before the job is booked.
- Do I need a survey before getting a firm installation quote?
- Yes — a proper UK installer survey checks your actual opening size, headroom, side room and access before confirming a firm price, because these factors are what push an installation above the standard reference figures. A quote given without a survey should be treated as indicative only.
UK standards and regulations referenced
- BS EN 13241
- BS EN 12635
Related
Last reviewed: . Next review due: .